Blackshape Prime - 4.3.9. Cruise; 4.3.10. Descent and Approach; 4.3.11. Landing

CF 300 – Flight Manual sect. 4 – Normal Operating Procedures
BY BLACKSHAPE
Document
n° BPU/FM003 Rev 3 dtd 03/06/2014 Page 47
-66
4.3.9. Cruise
(a) MAP / RPM SET
(b) Engine:
(A)Oil temperature
90° - 110°C
(B)Oil pressure
2.0 – 5.0 bar
(C)CHT
Less than 135°C
(c) Hot air carburetor As required
4.3.10. Descent and Approach
(a) Flight and avionics instruments SET
(b) RPM MAX
(c) Electric Pump ON
(d) Hot air carburetor As required
(e) Throttle As required
(f) Flaps CHECK V
FE
As required
4
.3.11. Landing
(a) LND light ON
(b) Belts Fastened and Tightened
(c) GEN/BATT CHECK ON
(d) Ignition CHECK BOTH
(e) Electric Pump CHECK ON
(f) Throttle As required
(g) Speed MAX 140 Km/h
(h) Landing Gear DOWN and Locked
(i) Flaps LND 120Km/h MAX
(j) Speed 110 Km/h
(k) Contact Speed 85 Km/h
(l) Brake progressively As Required
(m) Clear the Runway
UNCONTROLLED