Blackshape Prime - 1.5. Control Surfaces Travel; 1.6. Engine; 1.7. Propeller; 1.8. Fuel

CF 300 – Flight Manual sect. 1 - General
BY BLACKSHAPE
Document n° BPU/FM003
Rev 3 dtd 03/06/2014 Page 5
-66
1.5. CONTROL SURFACES TRAVEL
Ailerons
+15° -11°
Elevator
+20° -10°
Trim
+6° -30°
Rudder
+20° -20°
Flaps
10° 20° 30°
1.6. ENGINE
Model:
ROTAX 912 ULS3
Manufacturer:
Rotax Gmbh
Engine type:
4 horizontally-opposed cylinders with a total displacement of 1352 cm3, mixed
cooling (liquid
-cooled heads, air-
cooled cylinders), dual carburetors, integrated
gearbox (2.4286:1) with torque damper.
Compression ratio 11:1
Maximum power:
100 hp (73.5 Kw) at 5800 RPM – max 5 min.
1.7. PROPELLER
Manufacturer:
MT Propeller
Model:
MTV-33-1-A
Number of blades:
2
Diameter:
1750 mm
Type:
Hydraulic controlled variable pitch
1.8. FUEL
Fuel (*):
Min. RON 95
En 228 Super
En 228 Super plus
AVGAS 100LL
Fuel tank:
2 anti-blast tanks, installed into the central wing, one left one right with the
capacity of 33 liters each.
2 option auxiliary anti
-blast tanks, installed into the outer wing, one left
one
right, with the additional capacity up to 15 liters each
Total fuel capacity:
66 liters (96 liters optional)
(*) Refer to the “Rotax Operator’s Manual”
UNCONTROLLED