Blackstar FS-10 User Manual

English
10
10. Effects Mode LED
Off.
11. Navigation Mode LED
Off.
12. Display
Closest note to that played.
13. Multi function LED
On = string tuned to note shown on display.
Note: In all modes, holding Switch 4 will activate the tuner and
holding Switch 1 will change the mode of operation.
The table below shows a summary of the switch functions:
Switch 1 Switch 2 Switch 3 Switch 4
Patch Mode
Press
Ch1 Ch2 Ch3 Ch4
Hold
Mode
Change
Bank down Bank up Tuner
Effects Mode
Press
Reverb on/off Delay on/off Modulation
on/off
Tap Delay
(by default)
Hold
Mode change Set tap to
Delay
Set tap to
Modulation
Tuner
Navigation Mode
Press
Store Patch down Patch up Select
Hold
Mode change Bank down Bank up Tuner
Rear Panel
Connect the footcontroller to the rear of your ID:Series amplifier
where indicated. Always use a good quality guitar lead (as supplied).
Technical Specification
FS-10
Dimensions (mm): 160 x 119 x 80
Weight: 1.2kg
English
11
English

Blackstar FS-10 Specifications

General

Brand	Blackstar
Model	FS-10
Category	Controller
Language	English