Need help?Do you have a question about the Blackstar HT-1 and is the answer not in the manual?
General| Power Output | 1 Watt |
|---|---|
| Number of Channels | 2 |
| Reverb | No |
| Effects | No |
| Footswitch I/O | No |
| Effects Loop | No |
| Speaker Size | 8 inches |
| Preamp Tubes | 1 x ECC83 |
| Power Tubes | 1 x ECC82 |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
Guidelines on safe noise exposure levels and recommended hearing protection.
Port for connecting your guitar with a screened lead.
Controls the amount of overdrive and distortion for clean and drive channels.
Switch to engage the Overdrive channel. Press for Overdrive, out for Clean.
Adjusts the overall output volume for both channels.
Selects tonal characteristics, from American to British tones.
Controls the amount of reverb effect, available on specific HT-1 models.
Emulates speaker tone for recording or headphone use, disconnects internal speaker.
Stereo input for connecting MP3 players or other audio sources.
Light indicating that the amplifier is switched on.
The main on/off switch for the amplifier.
Connection point for the power supply cord.
Output for connecting an external 8 Ohm speaker cabinet.
Specifications for the Blackstar HT-1 and HT-1R Combo guitar amplifiers.
Specifications for the Blackstar HT-1RH Head guitar amplifier.
To Next Page
