Blackstar HT Soloist 60 User Manual

1
Owner’s Manual
Blackstar Amplification Ltd, Beckett House, 14 Billing Road, Northampton, NN1 5AW, UK
For the latest information go to: www.blackstaramps.com
Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement
and development, Blackstar Amplification Ltd reserves the right to alter specifications without prior notice.
Designed and Engineered by
Blackstar Amplification UK
HBK-1021 09/11
HT SOLOIST 60

Blackstar HT Soloist 60 Specifications

General

Power Output	60W
Channels	2
Power Tubes	2 x EL34
Reverb	Yes
Effects Loop	Yes
Footswitch	Included
Preamp Tubes	2 x ECC83
EQ	3-band
Speaker	1 x 12"

Summary

Important Safety Instructions

Electrical Safety Warnings

Critical warnings regarding power cord disconnection, fire, electric shock, rain, and moisture exposure.

Symbol and Cautionary Notes

Explanations of safety symbols indicating dangerous voltage and maintenance instructions, plus a caution for electric shock.

Front Panel Controls

Input Jack

Connect your guitar here using a quality screened guitar lead for optimal signal.

Clean Channel Voice Switch

Overdrive Channel Voice Switch

Equalisation Controls (Bass, Middle, Treble)

ISF (Infinite Shape Feature) Control

Shifts tone stack response between US and UK characteristics for flexible tonal signature.

Reverb and Presence Controls

Master Volume Control

Rear Panel Connections and Features

Mains Fuse and Input

Speaker Outputs

Connect extension speaker cabinets (1x16 Ohm or 1x8/2x16 Ohm).

Speaker Emulated Output

Provides a cabinet-emulated tone for recording devices or mixing desks.

Cabinet and Reverb Switches

Effects Loop

Send and Return jacks for connecting external effects units, with level selection.

Footswitch Mode Selector

Footswitch Connection

Technical Specifications