Do you have a question about the Blackstar HT-20R MkII and is the answer not in the manual?
Wattage | 20W |
---|---|
Channels | 2 |
Effects | Reverb |
Effects Loop | Yes |
Tubes | 2 x ECC83, 2 x EL84 |
Inputs | 1 x 1/4" |
EQ Controls | Bass, Middle, Treble |
Footswitch | Optional |
Outputs | 1 x 1/4" (Speaker), 1 x 1/4" (Emulated Output) |
Essential safety guidelines for operating the apparatus safely, covering water, heat, and ventilation.
Instructions on plug types, power cord handling, servicing, and avoiding electrical hazards.
Precautions regarding internal voltages, cleaning, condensation, and unauthorized modifications.
Guidance on noise exposure limits and the necessity of hearing protection at high volumes.
Welcome and overview of the Blackstar HT MkII amplifier series and design philosophy.
Description of the two-channel design, ISF, reverb, power scaling, and USB connectivity.
Details the Input, Volume, Voice Switch, and Tone controls for the Clean Channel.
Explains OD Select, Gain, Voice Switch, Volume, and EQ for the Overdrive Channel.
Controls for Reverb, Volume (HT-20R/RH MkII), Power Switch, and Power Indicator.
Information on Mains Fuse, Mains Input, H.T. Fuse, and Speaker Outputs.
Details on XLR/Jack emulated outputs, cabinet emulation, and headphone use.
Guidance on Effects Loop levels, return, send, and footswitch for external control.
Detailed specs for HT-5R/RH MkII and HT-20R/RH MkII models including power, valves, dimensions, and weight.
Instructions for connecting external audio devices and effects units.
Guidance on using the footswitch and securing the amplifier with a Kensington Lock.