Blackstar HT-DELAY - Memory Management and Specifications; Loop Memory Clear; DC Inlet and Technical Specs

Technical Specification
Power: 22V DC
Maximum Current Draw: 1.1A
Controls: Effect, Time, Feedback, Saturation, Level
Delay Time: 3.0 seconds in delay modes, 7.2 seconds in loop
modes
Valve: ECC83 (12AX7)
Switches: Effect On/Off Switch, Tap/Loop switch
Indicator: Effect On/Off, Saturation, Tap Time/Loop Status,
Power On/Off (Valve Backlight LED)
Jacks: Input, Left (Mono) Output, Right Output
Input Impedance: 1MOhm
Output Impedance: <1kOhm
Nominal Operating Level: -10dBV
Dimensions (mm): 160 X 119 X80
Weight: 1.3kg
DC Adapter: ADA Series Supplied
English
12
MEMORY CLEAR and Effect On/Off function - Loop
1 and Loop 2
When you press the Effect On/Off switch (12), the loop continues
playing ‘silently in the background’ until you press the Effect
On/Off switch again.
When you press the Effect On/Off switch for more than 1 second,
playback stops and the memory is cleared ready for a new
recording.
15. DC Inlet
For the input of the 22V DC / 1.1A adapter supplied. Always use
a Blackstar approved adapter.
English
11