To Next PageTo Next Page
Need help?Do you have a question about the Blackstar Sonnet 120 and is the answer not in the manual?
General| Power Output | 120W |
|---|---|
| Channels | 2 |
| Bluetooth | Yes |
| Type | Acoustic Amplifier |
| EQ | 3-band |
| Feedback Control | Yes |
| Inputs | 2 x XLR/TRS combo, 1 x 3.5mm Aux |
| Outputs | 1/4", XLR |
| Effects | Reverb, Delay |
| Speaker Configuration | 1 x 8" |
Essential safety guidelines for operating the amplifier, including water proximity, cleaning, ventilation, and servicing.
Welcome message, overview of the product's design philosophy, and intended use.
Overview of the Sonnet 120's key features, including preamp channels, reverb, EQ, and connectivity options.
Details on Channel 1's XLR/Jack input, phantom power, pad, and gain controls for optimal signal.
Explanation of the Shape switch and Low, Mid, High EQ controls for tone shaping on Channel 1.
Covers Anti-Feedback, Phase, and Reverb controls for Channel 1, enhancing sound quality and preventing feedback.
Details on Channel 2's inputs, phantom power, pad, and gain controls, mirroring Channel 1's functionality.
Explains the Shape switch and Low, Mid, High EQ controls for Channel 2, allowing for tone customization.
Details on Anti-Feedback, Phase, Reverb, and Reverb Type controls for Channel 2.
Covers Reverb Time, High Pass Filter, Brilliance, Master volume, and Power Indicator.
Guide to pairing and using Bluetooth for wireless music streaming and connecting devices.
Explains Discoverable and Scanning modes, LED indicators, and device disconnection for Bluetooth.
Details on Channel 1's Effect Loop Send/Return, D.I. Output XLR, and Pre/Post Select switch.
Explains Channel 2's Effect Loop Send/Return, D.I. Output XLR, and Pre/Post Select switch.
Covers Footswitch, MP3/Line In, Mix D.I. XLR Output, Ground Lift, and USB Audio Socket for connection.
Information on routing USB audio output for recording, including Mono and Split options.
Details on the Power Switch and Mains Input connection, including safety precautions for power.
Instructions for using the tilt-back stand and mounting the optional SA-2 stand adaptor.
Information regarding the amplifier's design and recommended instrument types due to thermal protection.
Detailed specifications including power, weight, dimensions, speaker configuration, and electrical characteristics.
Technical details for Channel 1 and Channel 2 inputs, shape, EQ, and output parameters.
Contact details for Blackstar Amplification Ltd and a disclaimer regarding specifications.
