Blackstar CORE STEREO 40 V2 User Manual

Blackstar Amplification Ltd, Beckett House, 14 Billing Road, Northampton, NN1 5AW, UK
For the latest information go to: www.blackstaramps.com
Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement
and development, Blackstar Amplification Ltd reserves the right to alter specifications without prior notice.
Designed and Engineered by
Blackstar Amplication UK
130300 M-1 11/16
Owner’s Manual
ID:CORE STEREO 10 V2, ID:CORE STEREO 20 V2,
ID:CORE STEREO 40 V2

Blackstar CORE STEREO 40 V2 Specifications

General

Power	40W
Amp Modeling	Yes
Software	Blackstar Insider
Speakers	2 x 6.5"
Channels	2
Effects	Reverb, Delay, Modulation
Inputs	1 x 1/4" Instrument Input
Outputs	Headphone Out
USB	Yes

Summary

Safety Guidelines

Restore Factory Settings

Front Panel Operation

Guitar Input and Tone Controls

Effects Section Controls

Patch Management

Save Amplifier Patches

Instructions on saving current amplifier sounds as user patches.

Recall Amplifier Patches

How to select and play stored patches using the amplifier's controls.

USB Audio Capabilities

USB Output Channels

Details the four independent audio streams available via USB output for recording.

USB Input Channels

Advanced Features

Reamping Mode Explained

Enables processing pre-recorded guitar signals via USB for re-recording.

Firmware Update Guide

Update Amplifier Firmware

Step-by-step guide for updating the amplifier's firmware using INSIDER software.

Update Mode Recovery

How to force the amplifier into Update Mode if issues arise during updates.

Technical Specifications

ID:CORE STEREO 10 V2 Specs

ID:CORE STEREO 20 V2 Specs

ID:CORE STEREO 40 V2 Specs