Blackstar ID:CORE STEREO 10 User Manual

Blackstar Amplification Ltd, Beckett House, 14 Billing Road, Northampton, NN1 5AW, UK
For the latest information go to: www.blackstaramps.com
Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement
and development, Blackstar Amplification Ltd reserves the right to alter specifications without prior notice.
Designed and Engineered by
Blackstar Amplification UK
HBK-1044 02/14
Owner’s Manual
ID:CORE STEREO 10, ID:CORE STEREO 20, ID:CORE STEREO 40

Blackstar ID:CORE STEREO 10 Specifications

General

Power Output	10W
Speaker Size	2 x 5”
Channels	2
Effects	Multiple Effects
Outputs	1 x Headphone Output, 1 x USB Output
Number of Channels	2
Total Power	10W
Reverb	Yes
Amp Modeling	Yes
EQ	3-Band EQ
USB	Yes
Footswitch Included	No
Speaker Configuration	Stereo
Inputs	1 x Instrument Input, 1 x Aux Input
Type	Digital Modeling Amplifier

Summary

IMPORTANT SAFETY INSTRUCTIONS

Introduction

Features

Factory Reset

Front Panel Controls: Input to ISF

Input Jack

Connect your guitar to the amplifier's input.

Voice Control

Selects one of six preamp voicings.

Gain Control

Adjusts the amount of overdrive or distortion.

Volume Control

Sets the overall output volume level.

ISF Control

Tunes the tonal character between American and British sounds.

Front Panel Controls: Effects to USB

Modulation Effect

Engages and focuses modulation effects like phaser or chorus.

Delay Effect

Engages and focuses delay effects for echo.

Reverb Effect

Engages and focuses reverb effects for ambience.

Effect Type Selection

Chooses the specific type of modulation, delay, or reverb.

Effect Level

Sets the intensity or depth of the selected effect.

Tap Tempo

Sets the rate for modulation and delay effects.

Power Switch

Turns the amplifier on or off.

USB Port

Connects to a computer for software and audio.

Front Panel Controls & Features: Manual to Recall

Manual Mode Button

Toggles between manual and preset patch modes.

Tuner Mode Engagement

Activates the built-in guitar tuner.

Footcontroller Input

Connects an optional FS-11 footcontroller.

MP3/Line Input

Connects external audio devices.

Emulated/Headphone Output

Provides output for headphones or recording.

Recall Indicator LED

Shows parameter status relative to front panel knobs.

Rear Panel

DC Power Input

Connects the external power adapter.

Programmability

Storing Patches

Saves the current amplifier settings as a patch.

Recalling Patches

Loads previously saved sound patches.

USB Audio

Technical Specification