To Next PageTo Next Page
Need help?Do you have a question about the Blackstar ID:CORE STEREO 10 V3 and is the answer not in the manual?
General| Power Output | 10W |
|---|---|
| Speakers | 2 |
| Channels | 2 |
| Number of Channels | 2 |
| Total Power | 10W |
| Effects | Yes |
| Technology Type | Digital |
| USB Connectivity | Yes |
| Amp Voices | 6 |
| Footswitchable | Yes |
| USB | Yes |
| Speaker Configuration | Stereo |
| Speaker Size | 2 x 5 inch |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| EQ | 3-band |
Read, keep, heed, follow instructions, and follow general usage and cleaning precautions.
Avoid defeating safety plugs, heed warnings about electric shock, and understand symbol meanings.
Do not open the case as it contains high internal voltages and no user-serviceable parts.
Avoid condensation, unauthorized modifications, blocking vents, liquids, unstable surfaces, and heat sources.
Protect hearing from high sound levels by wearing ear protection to prevent permanent hearing loss.
Explore the six Voice settings and the patented ISF control for custom tone design.
Learn the steps to reset your amplifier to its default factory settings by holding specific switches.
Learn how to store and recall your custom sounds (patches) directly on the amplifier.
Connect to a PC/Mac via USB for audio recording, using the amplifier as an audio capture device.
Keep your amplifier up-to-date by installing new firmware via the Blackstar ARCHITECT software.
