Blackstar CORE STEREO 10 V2 User Manual

Blackstar Amplification Ltd, Beckett House, 14 Billing Road, Northampton, NN1 5AW, UK
For the latest information go to: www.blackstaramps.com
Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement
and development, Blackstar Amplification Ltd reserves the right to alter specifications without prior notice.
Designed and Engineered by
Blackstar Amplication UK
130300 M-1 11/16
Owner’s Manual
ID:CORE STEREO 10 V2, ID:CORE STEREO 20 V2,
ID:CORE STEREO 40 V2

Blackstar CORE STEREO 10 V2 Specifications

General

Type	Guitar Amplifier
Model	CORE STEREO 10 V2
Number of Channels	2
Amp Modeling	Yes
Power Output	10W
Effects	Delay, Chorus, Flanger, Reverb
USB	Yes
EQ	3-Band
Speaker Size	2 x 5 inches
Inputs	1 x Instrument, 1 x Aux

Summary

Safety Instructions

Factory Reset

Front Panel Controls

Input

Connect your guitar here. Use a good quality screened guitar lead.

Voice

Changes preamp voicing from ultra clean to extremely overdriven, offering multiple amp tones.

Gain

Adjusts overdrive or distortion level. Controls saturation from clean to full distortion.

Volume

Controls preamp volume. High levels add valve power amp distortion and compression.

ISF

Selects between American and British tonal signatures. Adjusts tonal characteristics.

Power Switch

Turns the amplifier on and off. The white dot indicates the ON position.

USB

Manual

Tuner Mode

Connections and Inputs

Footcontroller

Emulated/Headphone Output

Rear Panel and Advanced Functions

Rear Panel DC Input

Connects the detachable DC power supply. Ensure power switch is OFF before connecting.

Programmability

Recall Indicator

USB Audio

USB Audio Channels

Advanced Features

Reamping Mode

Firmware Update