What to do if my BLADEZ XTR-COMP IIPB-SM 818 stops abruptly?
If your BLADEZ Scooter stops abruptly, it's likely the circuit breaker has tripped. To resolve this, allow the electric motor to cool down, then reset the circuit breaker by turning the power switch off and on.
Why my BLADEZ XTR-COMP IIPB-SM 818 will not move?
If your BLADEZ Scooter won't move when you activate the throttle lever, it could be due to a loose throttle cable, batteries that won't fully charge, or batteries that have reached the end of their life. Try tightening the cable, replacing the batteries, or replacing the charger.
Why does my BLADEZ XTR-COMP IIPB-SM 818 move so slow?
If your BLADEZ Scooter moves intermittently or very slowly, it may be due to batteries not being fully charged, a polarity problem, or a loose throttle cable. Try charging or replacing the batteries, and ensure you tighten the throttle cable.
How to fix batteries that don't hold charge on BLADEZ XTR-COMP IIPB-SM 818 Scooter?
If the batteries on your BLADEZ Scooter do not hold a charge and the unit does not have the specified travel range, it could be that the batteries have reached the end of their useful life, there's poor polarity between the batteries, or the charger is malfunctioning. Consider replacing the batteries or the charger unit.
What to do if charger light turns green right away on BLADEZ Scooter?
If the charger light turns green right away when charging your BLADEZ Scooter, continue to charge the batteries for 6-8 hours prior to initial use.
General| Deck Material | Aluminum |
|---|---|
| Wheel Size | 100 mm |
| Model | XTR-COMP IIPB-SM 818 |
| Category | Scooter |
| Weight Capacity | 220 lb |
| Wheel Material | Polyurethane |
| Brake Type | Rear Fender |
Step-by-step guide for unfolding the XTR-COMP II scooter.
Instructions for properly installing the handlebar onto the billet stem.
Explanation of the quick release deck for accessing batteries and PC board.
Details on the built-in seat base and how to install the seat.
Details on battery storage, removability, and options for purchasing additional batteries.
Guidance on charging the scooter before first use, after each use, and prior to storage.
Explanation of the LED light's function in indicating battery status and troubleshooting issues.
Description of the front and rear suspension system and factory adjustments.
Instructions on how to safely start, accelerate, and stop the powerboard.
Procedure for folding the scooter for compact storage and transportation.
Information about the standard 24V charger and charging procedures.
List of tools required for adjustments and servicing the powerboard.
Details on the front wheel disc/caliper brake system and its operation.
Instructions on how to adjust the tension of the brake lever.
Information on tire rotation, split rims, and recommended tire pressure.
Procedure for adjusting the head unit to correct looseness over time.
Guidance on chain lubrication, tension adjustment, and potential damage from neglect.
Common symptoms, potential causes, and solutions for operational issues.
Information on obtaining replacement parts and further customer support.
To Next Page
