PORTABLE MODEL – U20
Available only in 20 quart size.
1. Store beaters and whips at rear of table top.
2. Lock all 4 casters before using mixer.
3. Refer to General Installation instruction for further
information.
GENERAL FOR ALL MODELS
1.
Electrical Connections
CAUTION: Before making electrical connections be sure that current and voltage of the
mixer are identical to those of electrical inlet lines.
20 quart, 110 volt mixers are furnished with a six (6) foot flexible power cord.
On 30 quart mixers the line cord is to be supplied by the customer. Connections are made
inside the mixer column through the cover plate located on the back side of the column
near the bottom. NOTE: A six (6) foot flexible three (3) prong cord is available as an extra
cost option.
IMPORTANT: On 3 phase mixers, after electrical connection has been made, be sure the
mixer operates in a counter-clockwise direction as indicated by the arrow located above
the attachment. If electrical connection is reversed the transmission will not shift, nor will
the planetary action function.
2
Transmission Oil
After the first 200 hours of operation and every 6 months thereafter the transmission oil
must be changed.
When adding or changing transmission oil use 50 S.A.E. heavy duty oil. 3 pints required.
-4-
To Next Page
Loading...
Need help?
General
