INSTALLATION OF BUILT IN COOKTOP
In order to prevent leakage of any liquids on the counter, a special sealing tape is supplied together with
your cooktop. Apply this seal around the bottom edge of the cooktop (see below). The brackets are
installed to hold the cooktop in place.
Cut out a hole in the bench top as shown below. Place the cooktop (controls to the right) in the hole and fix in
position using the brackets.
The bottom of the cooktop reaches temperatures above 95°C. A board must be placed a minimum of
130mm below the cooktop that prevents anyone from touching the underside of the cooktop.
4
To Next Page
Loading...
Need help?
General
