Blanco BCCT64PP User Manual

OPERATING INSTRUCTIONS
The basic layout of the cooktop is shown in the diagram below.
The cooktop appliance is operated by touching buttons, with the functions confirmed by LED displays and
acoustic signals.
Turning On and Turning Off the Cooktop Appliance
If the appliance is in Stand-By-Mode (power connected, but not on), it is put into Operating-Mode by pressing
the On/Off button for at least 1 second. A beep signal indicates the successful operation acoustically.
On all power Level Displays a ´0` will appear and all Decimal Points of the Power Level displays will flash.
If there is no operation within 10 seconds, all the Power Level Displays will automatically turn off, returning the
appliance to the Stand-By-Mode.
If is pressed more than 2 seconds (in Operating-Mode), the appliance is switched off and is set into the
Stand-By-Mode again. The appliance can be turned off by pressing at any time; even if other buttons are
pressed simultaneously.
If there is any residual heat remaining in a cooking zone, this will be indicated on the correspondent Power
Level Display as a red “H”.
5

Blanco BCCT64PP Specifications

General

Brand	Blanco
Model	BCCT64PP
Category	Cooktop
Language	English