Blanco BDW3458X - Troubleshooting and Error Codes; Error Code Explanations

FAILURE CODES AND
WHAT TO DO IN CASE OF
FAILURE
31
ERROR CODE ERROR DESCRIPTION CONTROL F5
Inadequate water supply
• Make sure the water input tap is totally open and that there is no water cut. • Close the water input tap, separate the water input hose from the tap and clean the filter at
the connection end of the hose.
• Restart your machine, contact the service person if the error resumes.
F3
Error of continuous water input
• Close the tap. • Contact the service person.
F2
The waste water in the machine cannot be discharged.
• Water discharge hose is clogged. • The filters of your machine might be clogged. • Power off-on your machine and activate the program cancellation command. • If the error continues, contact the service person.
F8
Heater error
Contact the service.
F1
Alarm is active against water overflow
• Power off your machine and close the tap. • Contact the service person.
FE
Faulty electronic card
Contact the service person.
F7
Overheating error (temperature in the machine is too high)
Contact the service person.
F9
Divisor position error
Contact the service person.
F6
Faulty heater sensor
Contact the service person.