Blanco BFD9XP User Manual

7
EN
2/ DESCRIPTION OF YOUR APPLIANCE
• PRESENTATION OF THE CONTROL PANEL
On/Off:
Press this button to start your dishwasher.
Choosing a programme:
briefly press one button or the other in suc-
cession to select your programme.
AUTO:
Press this button to select an automatic pro-
gramme.
Set :
- Set the water softener.
(Depending on the water softener setting on
the following pages).
- Activate or deactivate the “Regenerating
Salt” and/or “Rinsing Product” lights, or the
“4/1” function (depending on the water softe-
ner setting on the following pages).
Delayed programme start
Press this button to delay the programme by 1
to 12 hours.
Start/Cancel: Briefly press this button
to start your programme.
If you make an error, to cancel a selection or
cancel a programme while it is running, hold
down this button for 3 seconds.
The indicator lights:
SSaalltt::
When lit, it indicates lack of regenerating salt
Rinsing liquid:
When lit, it indicates lack of rinsing product
Multi-purpose products:
lit; shows you that the “4/1” feature is turned
on and that the programmes are now automa-
tically adjusted if a multi-function tablet is
used.
In progress:
lit; indicates that your programme is running.
FF
EE
DD
CC
BB
AA
Advice:
A short audible signal (beep) confirm the button’s selection, except for the “On/Off” button.
6
EN
2/ DESCRIPTION OF YOUR APPLIANCE
Advice:
This user’s guide is applicable to several models. There may be some slight differences
in the details and the equipment between your appliance and the descriptions provided here.
• GENERAL PRESENTATION OF THE DISHWASHER
Fig. 01
AA
BB
CC
DD
EE
FF
GG
HH
II
Upper basket
Washing products dispenser
Anti-blocking gauge wire
Lower sprinkler arm
Regenerating salt tank
Waste filter
Main filter
Rinsing product dispenser
Description plate (After-Sales Ref)
II
HH
GG
FF
EE
DD
CC
BB
AA
45°C
70°C 65°C 55°C 45°C
BLANCO
Fig. 02
AA DD EE FF
CC
BB

Blanco BFD9XP Specifications

General

Brand	Blanco
Model	BFD9XP
Category	Dishwasher
Language	English