36
Troubleshooting Tip
If there is a malfunction, the dishwasher will display error codes to identify these:
Faucets is not opened, or water
intake is restricted, or water
pressure is too low.
Not reaching required
temperature.
Malfunction of heating element.
Some element of dishwasher leaks.
Failure of orientation of
distributary valve
Open circuit or break of distributary
valve.
WARNING
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of overfill or small leak, the water should be
removed before restarting the dishwasher.
To Next Page
Loading...
Need help?
General
