Need help?Do you have a question about the Blanco EVOL-S Pro 526255 and is the answer not in the manual?
General| Material | Stainless Steel |
|---|---|
| Finish | Brushed |
| Basin Configuration | Single |
| Soundproofing | Yes |
| Drain Placement | Center |
| Type | Kitchen Sink Faucet |
Instructions for cleaning the appliance within a week of installation and replacing the filter if cleaned later.
Guidelines for use by children, people with disabilities, and the need for supervision.
Requirements for water supply, ambient temperature, ventilation, power, and frost protection.
Advice for immunocompromised individuals and babies regarding water and descaling filters.
Information on the flammable refrigerant and precautions against fire hazards.
Precautions for storing and handling pressurized CO2 cylinders, including ventilation and inhalation risks.
Warning for pacemaker users regarding proximity to the magnetic spray head holder.
Illustrates the mixer tap, sink, and associated components within the system setup.
Details the main cooling and carbonisation unit and its placement within the system.
Details on how to swivel the mixer tap and switch between spray types.
Instructions on how to turn tap water on/off and identify cold/warm water.
How to select soda type (still, medium, sparkling) and amount using the control unit.
Steps for dispensing soda water, stopping flow, and the system's auto-rinsing function.
Explanation of blue LED states: standby, water running, and mixer tap off.
Interpretation of flashing blue LEDs, red LEDs, and display messages for errors or maintenance.
Overview of normal display, temperature setting, and connectivity mode options.
Instructions for resetting the system to factory settings and initiating the calibration process.
Indicators for when the CO2 cylinder needs changing, including LED and display messages.
Step-by-step guide on removing, inserting, and securing a new CO2 cylinder.
Information on where to order replacement CO2 cylinders online.
When to clean or change filter, based on usage, time, and CO2 levels.
Details on the EasyCare adapter and tab needed for the cleaning process.
Detailed instructions for initiating and executing the cleaning cycle using the EasyCare system.
Steps for correctly inserting and securing a new filter into the unit.
How to manually enter filter capacity from documents and water hardness considerations.
Information on the cleaning process time, water to avoid, and CO2 consumption.
Guide to calibrating dispensed water volumes to match mixer tap settings.
Detailed steps for calibrating the first and second dispensing volumes.
Information about available filter cartridges and how to order them online.
Details on cleaning accessories like the EasyCare tab and adapter.
Troubleshooting for pump runtime errors and leakage/moisture inside the appliance.
Troubleshooting for communication errors, appliance faults, and hardware issues.
Troubleshooting for overheating caused by ambient temperature or poor ventilation.
Solutions for issues like no mixer tap response or faulty images on the display.
Troubleshooting for dripping outlets, spitting spray, weak spray, or incorrect volumes.
Procedure for deaerating the system by removing air and CO2.
To Next Page