Blanco CHOICE.All - User Manual

Other manuals for Blanco CHOICE.All

Assembly Instructions100 pages

Questions and Answers

R
Roy MeyerSep 13, 2025
How to stop a Blanco CHOICE.All mixer tap from dripping?
- H
  Harold Ashley DVMSep 13, 2025
  To stop the mixer tap from dripping, re-calibrate the system.
J
Janice HughesAug 25, 2025
What to do if there is Error 2 (leak) in Blanco CHOICE.All?
- A
  Aaron MillerAug 25, 2025
  If you see Error 2, indicating a leak, check for water in the base cabinet. If water is present, trigger the kitchen or apartment fuse in the building’s electrical installation and disconnect the power supply. Check the system for water by viewing through the rear ventilation slits, tilting to allow any water to drain. After 15 minutes, reconnect the power supply and confirm the malfunction on the display by pressing 'OK'. Operate the system, dispensing 2 liters of each water type (hot, sparkling, and still), and wait 15 minutes. Then, inspect for any leaks in the base cabinet. If leaks persist, contact BLANCO Customer Service.
N
Nicholas GarciaAug 25, 2025
Why does my Blanco CHOICE.All show Error 9 (overheating) and the fan is noisy?
- A
  Adam WallsAug 26, 2025
  Error 9 indicates overheating, possibly accompanied by a noisy fan. First, wait 30 minutes to see if the error resolves itself automatically. If it doesn't, disconnect the power supply, wait 5 minutes, and then reconnect it. Check for nearby heat sources or heat accumulation in the base cabinet. Ensure proper ventilation by repositioning the water conditioning unit if needed, checking and improving ventilation openings in the base cabinet, and clearing any blockages from air inlets and outlets. If the issue continues, contact BLANCO Customer Service.
J
Jacob PerezSep 23, 2025
Why is the water green, tasting of chlorine, or foamy after running the cleaning program on my Blanco Plumbing Product?
- C
  catherine05Sep 23, 2025
  If the water is colored green, tastes of chlorine, or is still foamy after the cleaning program, run the cleaning program again with the filter inserted. Start the cleaning program via the menu.
E
erin09Sep 13, 2025
Why are the dispensing quantities of refined water incorrect on my Blanco CHOICE.All?
- M
  Michael LeeSep 13, 2025
  If the dispensing quantities of the refined water types are incorrect, re-calibrate the system. Also, check the routing of the blue and red plastic tubes (cool and hot water tubes) and the flexible hoses for any kinks.
P
Patty ChapmanSep 23, 2025
What to do if the menu on Blanco Plumbing Product cannot be operated?
- D
  David HardySep 23, 2025
  If the menu cannot be operated, disconnect the power supply, wait 5 minutes, and then reconnect it. If the problem persists, contact BLANCO Customer Service.
C
Christina GarciaSep 6, 2025
What should I do if my Blanco CHOICE.All Plumbing Product displays Error 14 - boiler sensor 1?
- J
  John WangSep 6, 2025
  If Error 14 appears, press 'OK' on the display to confirm the malfunction. Disconnect the power supply, wait 5 minutes, and then reconnect it. If the problem continues, contact BLANCO Customer Service.
L
Laura JohnsonSep 7, 2025
What should I do if my Blanco CHOICE.All displays Error 15 - boiler sensor 2?
- F
  faustinSep 7, 2025
  If Error 15 appears, press 'OK' on the display to confirm the malfunction. Disconnect the power supply, wait 5 minutes, and then reconnect it. If the problem continues, contact BLANCO Customer Service.
B
Benjamin Robinson Jr.Sep 23, 2025
Why can't I start the calibration program on my Blanco CHOICE.All Plumbing Product?
- C
  Cindy Robertson MDSep 23, 2025
  If the calibration program cannot be started, set the mixer tap to any other quantity and restart the calibration program in the menu.
K
Kevin DeleonAug 30, 2025
What does it mean if the LED on my Blanco CHOICE.All Plumbing Product mixer tap flashes red, but there's no error on the display?
- L
  Lydia ChambersAug 31, 2025
  If the LED on the mixer tap flashes red without an error message on the display, disconnect the power supply, wait 5 minutes, and then reconnect it. If the problem continues, contact BLANCO Customer Service.