16 17
CONTENTS
GENERAL INFORMATION
1. General instructions 17
1.1 Safety instructions 17
1.2 Other markings in this documentation 18
1.3 Units of measurement 18
2. Safety 18
2.1 Proper use 18
2.2 General safety instructions 18
2.3 CE marking 19
2.4 Certifi cation mark 19
INSTALLATION
3. Safety 19
3.1 General safety instructions 19
3.2 Regulations, industrial standards and legislation 19
4. Preparation work 20
5 Installation location 20
6. Assembly 21
OPERATION
7. Boiler description 21
8. Commissioning 21
9. Taking boiler out of operation 22
10. Meaning of LED display indicators 22
CLEANING, CARE, MAINTENANCE
11. Cleaning and care 22
12. Maintenance 23
12.1 Emptying the hot water boiler 23
12.2 Testing the safety assembly module 24
13. Technical data 24
13.1 Dimensions and connections 24
13.2 Electric circuit diagram 25
13.3 Heating-up time 26
13.4 Data table 26
ENVIRONMENT AND RECYCLING
27
GENERAL INFORMATION
1. General instructions
Important
Read through these instructions and the separate instructions for the BLANCO
mixer tap carefully before use. Pass on the instructions to the next user.
Take country-speci c installation and operation requirements into
account.
1.1 Safety instructions
1.1.1 Structure of safety instructions
SIGNAL WORD Type of hazard
This is where possible consequences of non-compliance with the safety
instruction are indicated.
This is where measures to prevent hazards are indicated.
1.1.2 Symbols, type of hazard
Symbol Type of hazard
Injury
Electric shock
Burns
(Burns, scalds)
1.1.3 Signal words
SIGNAL WORD Meaning
HAZARD Instructions where non-compliance will cause serious
injuries or death.
WARNING Instructions where non-compliance can cause serious
injuries or death.
CAUTION Instructions where non-compliance can cause moderate
or slight injuries.
ENEN
To Next Page
Loading...
