Need help?Do you have a question about the Blastrac 1-16DB4-V2 and is the answer not in the manual?
Guidance for operators on providing clear safety instructions to users.
Outlines responsibilities for trained personnel operating and maintaining the machine.
Essential safety measures to prevent accidents and ensure safe operation.
Details steps required to put the machine in a safe condition for maintenance.
Details pre-operation checks and procedures to ensure readiness and safety.
Highlights critical operator knowledge to prevent damage and downtime during operation.
Instructions and safety precautions for starting the machine's engine.
Outlines specific procedures for starting the engine in different conditions (cold, hot, dry).
Step-by-step guide on the sequence of operations for using the machine.
Lists the steps for safely shutting down the machine.
Emphasizes shutdown before maintenance and adherence to safety regulations.
Step-by-step instructions for removing and installing the blast wheel assembly.
Covers regulations, checking oil level, and changing oil for the engine.
Details lubrication requirements for the PTO, main bearings, and lever shaft.
Guides on how to adjust the clutch for wear and proper engagement force.
Specifies the general terms, conditions, and limitations of the product warranty.
General| Model | 1-16DB4-V2 |
|---|---|
| Power Source | Electric |
| Voltage | 230V |
| Weight | 143 lbs (65 kg) |
| Frequency | 50 Hz |
To Next Page
