Blastrac 1-8DM - User Manual

OPERATING MANUAL 1-8DM
VERSION 1.1
www.blastrac.com 1-800-256-3440

Summary

3. Safety

Safety Precautions and Regulations

Covers safety precautions, regulations, and the meaning of safety decals on the machine.

Operator Safety Instructions

Specific safety instructions for operators, including PPE and operational procedures.

4. Initial Operation

Power Supply and Machine Checks

Essential checks for power supply and machine components before starting operation.

Machine Controls and Adjustments

Overview of controls, handle adjustment, and setup for close blasting mode.

Pre-Operation and Startup Procedures

Steps for before switch on, switching on, and operating the machine correctly.

Machine Shutdown Procedure

Safe steps for switching off the machine, including closing valves and disconnecting power.

6. Maintenance

Liner and Tune-Up Kit Replacement

Blast Wheel Mounting, Cleaning, and Storage

7. VFD Trouble Codes

8. Technical Data

1. Spare Parts

Spare Parts Diagram and List (Fig. 01)

3. Electrical

220 V Electrical Schematic (Fig. 04)

110 V Electrical Schematic (Fig. 05)

Product Warranty

General Warranty Terms and Conditions

Blastrac 1-8DM Specifications

General

Weight	170 lbs
Working Width	7.75 in
Voltage	115V or 230V
Power Source	Electric
Frequency	50/60 Hz