Operatin
manual BDC-654
7/16
info@blastrac.eu
These elements must be disposed of in sealed bags according to the applicable
regulations and in accordance with the local laws governing the disposal of such
material.
This procedure must also be followed when the filters have to be disposed.
Compartments that are not dust-tight must be opened with suitable tools and
thoroughly cleaned.
Safety regulations
The following sticker is placed on the machine.
Meanings of these symbols are:
Ear protection is obliged
Safety glasses with lateral protection are obliged
CE-mark on this machine
Safety shoes obliged
Consult the manual before operating the machine
Personnel must tie back long hair and not wear loose clothing or jewellery including rings.
Wear gloves and dust mask during operating the machine.
Persons who are not operating the machine must not be permitted to stay in the
surrounding area of the machine.
Don’t change anything on the machine. Use always cables which are approved and
safety earthed (extend) cables. The machine is always equipped with an earthed
connection, do not change this and use always earthed cables with an earthed
plug.
Connect the main power supply cable to an installation with an earth leakage
circuit breaker.
Inspect and test the electrical components regularly. The electrical components
have to satisfy to the requirements which apply to these components.
Always call a skilled electrician or your distributor when you have questions about
the safety of the electrical components.
Work on electrical equipment or operating materials may only be undertaken by a
skilled electrician or by trained persons under the guidance and supervision of a
skilled electrician as well as in accordance with the electrical engineering
regulations.
Pull out the main plug during inspections and repair operations on the machine.
Never operate the machine when the surface is wet.
Never use the machine in the rain.
To Next Page
Loading...
