Operatin
manual BDC-654
9/16
info@blastrac.eu
6. Maintenance
Pay attention to Chapter 3 "Safety" during maintenance and repair works.
Failures due to inadequate or incorrect maintenance may generate very high repair
costs and long standstill periods of the dust collector. Regular maintenance therefore is
imperative.
Operational safety and service life of the dust collector depend, among other things, on
proper maintenance.
The following table shows recommendations about time, inspection and maintenance for
the normal use of the dust collector.
Operating hours/
time period
Inspection points, maintenance instructions
12 h after repairing
Check all accessible screw connections for tight seat.
Daily and prior to
starting work
Check all safety devices working adequate.
Check the function of the residual current operated device.
Check the hose connections for tightness and fixed seat.
Check the hose to the filter for damages.
Make sure that the dust bin of the filter is emptied
Check the electric connections for sediments of dirt or foreign
bodies.
Check the electric motors for dirt and other contaminants.
Annually
Full overhaul and cleaning of the complete dust collector.
The time indications are based on uninterrupted operation. When the indicated number of
working hours is not achieved during the corresponding period, the period can be
extended. However a full overhaul must be carried out at least once a year.
Due to different working conditions it can’t be foreseen how frequently inspections for
wear check’s, inspection, maintenance and repair works ought to be carried out. Prepare
a suitable inspection schedule considering your own working conditions and experience.
Our specialists will be happy to assist you with more advice.
To Next Page
Loading...
