13
4.4 Transport
Read chapter 3.7 “Transport safety”
Be careful! Make sure nobodies feet get under the wheels. Wear appropriate safety shoes when you drive the
machine to or from the work area.
Make sure that no vehicles, such as forklift trucks and other equipment run over the electric cable and the dust
hose.
The machine should only be moved around when the dust hose, and power supply cable are disconnected.
WARNING! Always make sure all rotating parts have come to a complete standstill and there is no more
pressure in de air tank before moving the machine around.
Remove the dust from the dust collector before it is transported. The dust
collector may only be lifted by using the suspension eyelet. The weight and
dimensions of the dust collector are shown in Chapter 9 "Technical data“.
To Next Page
Loading...
