EasyManua.ls Logo

Blastrac BDC-99 - Water separator; Compressor

Blastrac BDC-99
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
6.4 Water separator
The water separator filters dirt particles, oil and water from the air.
It is recommended to replace the filter after every 200 operating hours.
1. Head
26. Valve
27. Floater
28. O-ring
29. Bowl
30. O-ring
31. Filter element
36. Louver
This spitter type drain operates momentarily
when a rapid change in air flow occurs or when the supply
pressure is reduced.
The separated water will be drained in the ‘Drain Box’
It has to be emptied daily.
Checking the filter:
Unscrew 29. Bowl and keep it upright, so that the vlotter and
o-ring will stay in place.
Check 31. Filter element on contaminants and calcium deposits.
Clean the filter with warm water and pressurised air or replace if
needed.
6.5 Compressor
Replacement or cleaning of the air filter of the compressor is depending on the environment in which the dust
collector is operating.
Check the filter every month.
Unscrew the cap and take out the
filter inside.
Clean or replace if necessary.

Other manuals for Blastrac BDC-99

Related product manuals