Blata minimocard 2.6 - User Manual

Summary

EC Declaration of Conformity

Safety Warnings and Precautions

General Riding Safety

Advises on safe operation, wearing safety equipment, and riding within limits.

Maintenance and Component Safety

Covers pre-ride checks for brakes, chain, tires, and general maintenance safety.

Fuel Handling and Disposal

Provides guidance on handling flammable fuel and safe product disposal.

Introduction to the Minimotard

Minimotard 2,5 Technical Specifications

Unpacking and Basic Controls

Before Starting Operation

Engine Starting and Carburetor

Starting the Engine Procedures

Steps for starting the engine, including choke usage and idle speed adjustment.

Carburetor Maintenance and Settings

Guidance on reassembling carburetor flange and checking screw tightness.

Riding the Minimotard

Periodic Maintenance Schedule

Before Each Ride Checks

Essential checks before every ride, including brakes, lubrication, and cleaning.

Maintenance After 5 Hours of Riding

Tasks to perform every 5 hours, like checking bolts, cleaning air filter, and brake pads.

Maintenance After 10 Hours of Riding

Check clutch pad thickness every 10 hours of riding.

Chain Setting and Adjustment

Clutch Pad Replacement Procedure

Brake Adjustment Procedures

Incremental Brake Adjustment

How to adjust free play at the handlebar lever for fine-tuning.

Basic Brake Adjustment

Steps for adjusting the brake caliper for proper wheel turn.

Front Brake Pad Replacement

Rear Brake Pad Replacement

Front Wheel Dismantling and Mounting

Rear Wheel Dismantling and Mounting

Pinion Exchange Procedure

Tire Replacement Guide

Air Filter Dismantling and Assembly

Non-Use and Storage Procedures

Blata minimocard 2.6 Specifications

General

Final Drive	Chain
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Engine Type	Single-cylinder, 2-stroke
Cooling System	Air cooled
Fuel System	Carburetor
Frame	Steel
Rear Suspension	Monoshock