Blaupunkt 32/131G-GB-1B-3TCU-UK - Attaching the Stand

8
Attaching the stand
Attaching the Stand
To complete the stand installation you will need a Phillips screw driver.
Place the TV set on a  at and clean surface with the panel facing downwards to avoid damage.
( g.1) Attach the stand neck to the rear of the TV set. ( g.2) Secure the neck to the TV using the 4 x ST(4x14)
screws provided.
( g.3) Attach the stand base to the neck. ( g.4) Secure the base to the neck using the 6 x ST(4x14)
screws provided.
1
4 x ST(4x14)
/ST(4x16)
2
11 /2
3
6 x ST(4x14)
/ST(4x16)
4
UserGuide - 32-131G-GB-1B-3TCU-UK.indd 8UserGuide - 32-131G-GB-1B-3TCU-UK.indd 8 1/23/2013 10:02:24 AM1/23/2013 10:02:24 AM