English
9
Detaching the stand
Important - If you mount this television on the wall, use only
the screws holes for wall mounting. Using other screws can
cause irreparable damage to internal components.
g 1
g 2
TV
TV
Viewing angle
Viewing angle
INCORRECT
CORRECT
Viewing angle
Viewing angle
Wall mounting the TV
This television requires a VESA 100 wall mount,
or equivalent.
1. Remove the four screws
2. The wall mount can now be easily attached to the mounting
holes on the rear of the TV. These holes are indicated in the
picture below.
For optimum viewing, if wall
mounting the TV higher than
eye level, the TV should be tilted
downwards so that the TV’s screen is
‘face on’. See g 1 and 2
Detaching the Stand
To detach the stand please remove the 4 screws highlighted below and remove the stand from the rear of the TV set.
4 x ST(4x14)
/ST(4x16)
UserGuide - 32-131G-GB-1B-3TCU-UK.indd 9UserGuide - 32-131G-GB-1B-3TCU-UK.indd 9 1/23/2013 10:02:24 AM1/23/2013 10:02:24 AM
To Next Page
Loading...
