66
➮ Press the joystick OK 8 or the
MENU button 9 to close the
menu.
The settings are saved.
Setting the minimum navigation
volume
You can set the volume level at which
the navigation voice output is “mixed in”
with the audio source.
Note:
● Set the volume on the navigation
system to maximum. If the output
sounds distorted, reduce the vol-
ume slightly on the navigation sys-
tem.
➮ Press the MENU button 9.
➮ Press the softkey 5 assigned to
the “VOLUME” display item.
➮ Press the softkey 5 assigned to
the “NAVI DIFF” display item in or-
der to adjust the volume.
➮ Set the volume level that you want
using the volume control 2.
➮ Press the joystick OK 8 or the
MENU button 9 to close the
menu.
The settings are saved.
ADJUSTING THE VOLUME
Note:
● You can also adjust the volume
during the voice output using the
volume control 2. This setting
only applies to the current voice
output and is not saved.
To Next Page
Loading...
