13
ACR 4231-034
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
Fast forward
• Press FF (fast forward).
At the end of the tape, the tape will
switch to the opposite track and start
playing.
Stop fast forward
• Press FR.
Fast rewind
• Press FR (fast rewind).
When the tape has rewound to the be-
ginning, it will switch to play.
Stop fast rewind
• Press FF.
Autoreverse function
Switching tracks during playback.
• Press FR and FF at the same time.
At the end of the tape, the unit will automati-
cally switch to the other track.
Note:
If there is too much tension on the cassette
tape during playback, it may switch to the
other track by itself. Check the condition of
the tape. Sometimes it helps to rewind the
cassette tape completely.
Cassette tape operation
Insert cassette tape
• Switch the car radio on.
• Insert a cassette tape with side A or 1
facing up, the open side facing to the
right. Do not use force.
The cassette tape will be played in the directi-
on used last. The display will indicate which
side is being played.
- indicates side A or 1
- indicates that side B or 2 is being played
(reverse operation).
Remove cassette tape
• Press
The cassette will be ejected.
Care of your audio equipment
We recommend that you use only C60/C90
cassette tapes in your car radio. Protect your
cassettes from dirt, dust and temperatures
exceeding 50 °C. During cold weather, allow
cold cassettes to warm up somewhat before
playing them in order to avoid uneven tape
transport. Operating problems and sound
distortions may occur after approximately
100 hours of playing time and are caused by
dust particles which adhere to the rubber
roller pad and the tape head. Use a cleaner
cassette to remove normal dirt build-up. If
more dirt than usual has accumulated, use a
cotton bud dipped in rubbing alcohol to clean
these parts. Never use any hard tools.
To Next Page
Loading...
Need help?
General
