Blaupunkt Amplifier User Manual

System Planning
stem
slanning
is
the best way to maximize your amplifier's
performance.
By
planning yur
intaliin
carehll
you
can avoid
situations
where
the
performance
and
reliability
of
your
systern
is
commisni Our authorized dealer has been trained to maximize your systen's
intalin
the
ampliher,
and
is a
valuable
resource
in
helping you
with
your
system's
design
and
instalation.
Speaker Requirements
Each channel of your amplifier can easily handle 4
Q speaker loads when used in Stereo Mode. When
a channel-pair is bridged, the recommended
minimum load impedance is 32 for subwoofer use,
and 40 for full range operation. Although
operation with lower impedances is not likely to
cause immediate damage to the internal circuitry,
the unit will most likely overheat, causing the
thermal protection circuitry to shut down the
amplifier. When the chassis cools down, normal
operation will resume.
Continuing to operate the amplifier under these
conditions is not recommended and will reduce its
life
expectancy.
Most
speakers
designed
for
car
audio operation are 40 impedance. Connecting
two
such
speakers
in
parallel
will
result
in
a 20
nominal impedance, which is not recommended
for use with bridged channels of your amplifier.
" 1
82
42
42
Series wiring
Parallel wiring
40
82
49
4Q
Series/parallel wiring
sound quality when
4Q
8Q
4Q
4Q
ﺎﻤﯿﻟاﻮﮐ هﺎﮕﺷوﺮﻓ
214 کﻼﭘ مود ﻪﻘﺒﻃ 26 یرﺎﺠﺗ ﻊﻤﺘﺠﻣ ﯽﺑﻮﻨﺟ ﯽﺳودﺮﻓ ناﺮﻬﺗ
ﺎﻤﯿﻟاﻮﮐ ﯽﺘﻧﺮﺘﻨﯾا هﺎﮕﺷوﺮﻓ
021-66712845
QualimaShop.com

Blaupunkt Amplifier Specifications

General

Brand	Blaupunkt
Model	Amplifier
Category	Amplifier
Language	English