A12
29
• Select the required fan speed by pressing the button. Three
speeds are available.
HIGH MEDIUM LOW
• Water is removed from the air and collected in the tank.
• When the tank full, the appliance shuts down and (full tank)
appears on the display. The tank cap must be extracted and emptied. Run
off all water left into a basin.
• When all the water has been drained, put the cap back in place.
• When the tank has been emptied, the appliance starts up again.
N.B.- When operating in very cold rooms, the appliances defreeze automatically,
momentarily interrupting normal operation. appears on the display. During
this operation, it is normal for the noise made by the appliance to change.
-In this mode, you may have to wait for a few minutes before the appliance starts
giving out hot air.
-In this mode, the fan may operate for short periods, even though the set
temperature has already been reached.
To Next Page
Loading...
Need help?
General
