A12
34
Programming start down
• Press the button, the screen will display 1~24 hours, and several
symbols are flash together. (Fig. 5)
• Press several times until the corresponding time is displayed. Wait about 5
seconds, the timer will be active. Then only the symbol will displayed
on screen. (Fig 6)
• Press again the button or the button, the timer will be cancelled,
and the will disappear from screen. (Fig. 7).
Fig 5 Fig 6 Fig 7
Thank you for choosing our quality air conditioner. Please be sure to read this
manual carefully before using. Any question, Please contact the professional
service for help.
To Next Page
Loading...
Need help?
General
