www.blaupunkt.com
Arrifana 08C
20
CLOCK BUTTON
1. To set the correct time of the day, press the CLOCK button.
2. The clock display will flash; set the clock using the UP/DOWN button.
3. Each time the UP or DOWN button is pressed the minute display will
increment/decrement by 1. After the correct time is set press the CLOCK button to store
the set time.
SLEEP FUNCTION
Under this function the unit maintains the room temperature and humidity at optimum level
with silent operation. The unit will run in a preset programmed algorithm which will vary the
set temperature after every preset time interval. The unit will be turned off after 8 hours and
will be in STANDBY mode.
Fan speed cannot be adjusted and is always set to low under this function.
TO SET
1. Select the desired mode of operation – Cool/Dry or SMART.
2. Press the SLEEP button, sleep icon will appear on the display and the remote which will
indicate the unit is set in SLEEP function.
To Next Page
Loading...
Need help?
General
