Blaupunkt BLUEBOT XBOOST - Pause, Start and Shutdown; Time Scheduling Setting; Water Tank Use

PS: Bef
ore scheduling setting, you need to set the Robot time through timing setting button @on the remote control.
Product use / Pause, Start and Shutdown
Pause: During the operation of the Robot, press the Robot start/pause button or “Pause” button on the remote control e to pause the operation of the Robot.
Start: If the Robot stops working for more than ten minutes, it will automatically switch to sleep mode (all the Robot lights are off). You can wake up the Robot by clicking the
Robot start/pause button first; then click the Robot button again or any keys on the remote control and APP to restart.
Shutdown: After the Robot stops working, press the Robot start/pause button for a long time. When the indicator light of the Robot is off, it means the Robot is shut down.
*Recommendation: after the Robot finishes its work, do not shut down but keep it in charging state in order to perform better next time.
Pr
oduct Usage / Time Scheduling Setting
Scheduling settings: Press the “ Scheduling ” button  ton remote control for a short time to set the Robot time scheduling.
After you have set the time scheduling, the Robot will automatically start cleaning at the scheduled time.
08
EN