Blaupunkt BLUEBOT XBOOST User Manual

Applicable scenario: The most commonly used cleaning method is that the main engine uses a bow-shaped path
to plan and clean the whole hause according to the actual home environment.
Setting method: In the shutdown state, press and hold the start/pause button. When the indicator light of the
Robot is on, this indicates that the Robot is powered on. When the button is pressed for a short time, or you use
the automatic cleaning bottom on the remote control, the Robot starts automatic cleaning.
For enter the Robot super sunction mode, Press the one more time again.
Single Room Cleaning:
Applicable scenario: Used to cleaning the single room Setting method :Click the remote control mode switch
button to select the single room cleaning mode to start the single room cleaning.
Friendly reminder: When one single room is in need of cleaning, please close the door and the Robot will do
centralized cleaning in the room. If this room does not have a charging station, the Robot will return to the starting
point after cleaning.
Single room cleaning mode is always the super sunction cleaning model.
Edge Cleaning
Applicable scenario: For indoor corners cleaning, the Robot cleans along the perimeter of fixed objects (such as
walls), and returns to the charging station after the edge cleaning is finished.
Setting method: Click the “Mode Switch” button on the remote control to select the Edge cleaning mode to
start the edge cleaning.
Manual Control
Applicable scenario: Suitable for manual control cleaning.
Setting method: Click the “Direction” button on the remote control , to control the robot to move forward and
backward and turn etc.

Blaupunkt BLUEBOT XBOOST Specifications

General

Shape	Round
Product color	Black
Dust container type	Dust bag
Brush type	Side brush
Noise level	- dB
Wet mopping	Yes
Water tank capacity	0.35 L
Vacuum air filtering	HEPA
Dust capacity (total)	- L
Battery capacity	- mAh
Battery technology	-