Blaupunkt BLUEBOT XBOOST User Manual

Product use / Pause, Start and Shutdown
Pause: During the operation of the Robot, press the Robot start/pause button or “Pause” button on the remote
control to pause the operation of the Robot.
Start: If the Robot stops working for more than ten minutes, it will automatically switch to sleep mode (all the
Robot lights are off). You can wake up the Robot by clicking the Robot start/pause button first; then click the Robot
button again or any keys on the remote control and APP to restart.
Shutdown: After the Robot stops working, press the Robot start/pause button for a long time. When the indicator
light of the Robot is off, it means the Robot is shut down.
*Recommendation: after the Robot finishes its work, do not shut down but keep it in charging state in order to
perform better next time.
Product Usage / Time Scheduling Setting
Scheduling settings: Press the “Scheduling” button ton remote control for a short time to set the Robot time
scheduling.
After you have set the time scheduling, the Robot will automatically start cleaning at the scheduled time.
PS: Before scheduling setting, you need to set the Robot time through timing setting button on the remote
control.
Product Use / Water Tank Use
Do not use the floor mopping function on carpets.
After mopping the floor, please empty the water tank in time and remove the mopping cloth.
A. Add water
B. Install Mopping Cloth

Blaupunkt BLUEBOT XBOOST Specifications

General

Shape	Round
Product color	Black
Dust container type	Dust bag
Brush type	Side brush
Noise level	- dB
Wet mopping	Yes
Water tank capacity	0.35 L
Vacuum air filtering	HEPA
Dust capacity (total)	- L
Battery capacity	- mAh
Battery technology	-