30
otherwise contact your service provider.
• Change PIN and Change PIN2: In this menu, you can change
the PIN / PIN2 codes, enter the new codes twice twice after
entering the old code for which a message appears on the
display. The code must consist of 4 to 8 digits. You can only
change the PIN code if the PIN request is active.
· Telephone security
Press OK to turn the phone lock on or off, the current status
is indicated by the [Phone Lock] line.
To activate the phone lock, you must enter the phone
password. If this feature is active, the phone password must
be entered every time you turn it on.
Note: The default phone password is 0000. Please change this
to a unique code as soon as possible. The specified code may
consist of 4 to 8 digits.
· Auto lock
In this menu, you can deactivate the keypad lock and set how
fast it will be on when it is switched on (15 sec, 30 sec, 1
minute, 5 minutes).
6.8.4 Network Settings
Under Settings> Network Settings, you can select automatic
(network access automatically) and manual network
selection (from the displayed list to the network).
6.8.5 SOS Function Settings
To set the SOS function, go to Menu> Settings> SOS Settings.
• Status: activates the function (SOS button on the back of
the device).
• SOS numbers: dial the numbers listed here by pressing the
SOS button or sending an SMS message (if active) to the
numbers in the list. The alarm chain lasts until one of the
To Next Page
Loading...
Need help?
General
