Blaupunkt Casablanca CD51 - Setting the Scantime; Optimizing Radio Reception; Displaying Scrolling Text

13
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
Stopping SCAN and continuing
listening to a station
➮ Press the OK button ;.
Scanning is stopped and the station that
was tuned into last will then continue to
be heard.
Setting the scantime
➮ Press the MENU button 8.
➮ Keep pressing the button : un-
til “SCANTIME” appears in the dis-
play.
➮ Set the required scantime using
the
and buttons :.
➮ When you have finished making
your changes, press the MENU 8
or OK button ; twice.
Note:
The set scantime also applies to scan-
ning carried out in CD and CD-changer
mode.
Optimizing radio reception
Treble reduction feature during
interference (HICUT)
The HICUT function improves reception
during poor radio reception (only FM).
If interference occurs, the treble is au-
tomatically reduced thus reducing the
interference level.
Switching HICUT on/off
➮ Press the MENU button 8.
➮ Keep pressing the button : un-
til “HICUT” appears in the display.
➮ Press the
or
button : to set
HICUT.
“HICUT 0” means no reduction will be
made. “HICUT 3” means a maximum
automatic reduction of the treble level
and interference level.
➮ Press the MENU 8 or OK button
;.
Switching bandwidth during
interference (SHARX)
The SHARX function allows you to
largely avoid interference caused by
neighboring radio stations (FM only).
Switch on the SHARX function if you
experience a high radio station density.
Switching SHARX on/off
➮ Press the MENU button 8.
➮ Keep pressing the button : un-
til “SHARX” appears in the display.
➮ Press the
or
button : to
switch SHARX on/off.
“SHARX OFF” means no automatic
bandwidth switching will be carried out.
“SHARX ON” means that automatic
bandwidth switching will be carried out.
➮ Press the MENU 8 or OK button
;.
Displaying scrolling text
Some radio stations use the RDS sig-
nal to transmit advertising or other in-
formation instead of their station name.
These scrolling texts appear in the dis-
play. You can deactivate the feature for
displaying scrolling texts.
➮ Keep the RDS button 4 pressed
until “NAME FIX” appears in the
display.
RADIO MODE