18
are played randomly before the next CD
in the changer is played.
Stopping MIX
➮ Press button 5 MIX > until “MIX
OFF” appears briefly in the display
and MIX disappears.
Scanning all tracks on all CDs
(SCAN)
➮ To briefly play all the tracks on all
inserted CDs in ascending order,
press the OK button ; for longer
than two seconds.
“SCAN” appears in the display.
Stopping SCAN
➮ To stop scanning, briefly press the
OK button ;.
The current track will then continue to
be played.
Note:
You can set the scantime. For further
details on setting the scanning time,
please refer to the section entitled “Set-
ting the scantime” in the “Radio mode”
chapter.
Pausing playback (PAUSE)
➮ Press button 3 >.
“PAUSE” appears in the display.
Canceling pause
➮ Press button 3 > while in
pause mode.
Playback is continued.
Naming CDs
The car radio allows you to assign
names for up to 99 CDs so that you can
recognize them more easily. The names
can be a maximum of seven characters
long. If you try assigning more than 99
names, “FULL” will appear in the display.
Entering / editing CD names
➮ Press the MENU button 8.
➮ Press the or button : until
“CDC NAME” appears.
➮ Press the or
button :.
You will now be in selection mode.
➮ Press the or button : to se-
lect the CD you wish to assign a
name to.
➮ Press the
or button :.
You will now enter editing mode. If your
CD does not have a name yet, seven
underscores will appear in the display.
➮ The currently active input position
flashes.
➮ Press the or button : to se-
lect the character you want. If you
want an empty space, simply select
the underscore.
➮ Press the
or
button : to
move from one input position to an-
other.
➮ To save the name, press the
MENU 8 or OK ; button.
Deleting a CD name
➮ Listen to the CD whose name you
wish to delete.
➮ Press the MENU button 8.
CD CHANGER MODE
To Next Page
Loading...
