Blaupunkt Casablanca CD51 - Page 19

20
Setting the time manually
➮ To set the time manually, press the
MENU button 8.
➮ Keep pressing the button : un-
til “CLOCKSET” appears in the dis-
play.
➮ Press the button :.
The time appears in the display. The
minutes flash on and off and can be
adjusted.
➮ Set the minutes using the and
buttons :.
➮ Once you have set the minutes,
press the
button :. The hours
now flash on and off.
➮ Set the hours using the and
buttons :.
➮ Press the MENU 8 or OK ; but-
ton twice.
Selecting 12/24-hour clock
mode
➮ Press the MENU button 8.
“MENU” appears in the display.
➮ Keep pressing the button : un-
til “24 H MODE” or “12 H MODE”
appears in the display.
➮ Press the
or button : to
switch between the modes.
➮ When you have finished making
your changes, press the MENU 8
or OK ; button.
Displaying the time continuously
when the unit is off and the
ignition is on
➮ To display the time when the unit is
turned off and the vehicle ignition is
switched on, press the MENU but-
ton 8.
“MENU” appears in the display.
➮ Keep pressing the button : un-
til “CLK DISP OFF” or “CLK DISP
ON” appears in the display.
➮ Press the
or
button : to
switch between the ON/OFF set-
tings.
➮ When you have finished making
your changes, press the MENU 8
or OK ; button.
Briefly displaying the time when
the unit is switched off
To briefly display the time when the unit
is switched off:
➮ Press the / DIS button 7.
The time is displayed for eight seconds.
CLOCK - TIME