Blaupunkt CDC-RF6IR - Page 9

Vertical Installation
onfinn
that Anti-Vibration
Switches on both left and
right sides are set to position V,
l Attach brackets (L) and (R)
using the hexagonal bolts
(M5 x 8).
l Attach brackets (L) and (R) to
their respective brackets (B)
using the hexagonal bolts
(M6 x 20) and the hexagonal
nuts (MS).
l Pull back the carpet and determine
where to attach the unit.
l Stick the supplied double-sided tape
to the bottom of the brackets (B) and
peel off the paper backing.
l Affix the unit to the floor by pressing
in place.
l Once more, use the hexagonal nuts
to
attach the
changer on
top of the