Headphones overview
(
~
Adjustable headphone band
® Rotating earpieces
0
~
)
Battery compartment
CiD
C>
button
Switching the headphones
on/off
(press for 3 seconds)
(
~_?
)
Ear
cushion (left)
;0
Ear
cushion (right)
G~
Power-on indicator (green
LED)
Flashing: The headphones
are
searching for a transmitter
Illuminated:
The headphones
are
receiving a signal
0}
)
PAIR
button
Frequency
tuning
between transmitter and headphones
(i6)
VOL+......._
-control
Adjusting the volume
of
the headphones
Charging
the
battery in the transmitter
7---:--:----:-----~@
~~_____,@
The transmitter
is
operated
with
a rechargeable battery.
Charge
the battery
completely
before its first
use.
The operating time
is
up
to
6 hours.
~
Connect
the
USB
cable
with
the
USB
port
of
the transmitter.
~
Connect
the
USB
cable
with
the
USB
port
of
the computer. The battery
can
also be
connected
with
the mains
receptacle
by using a
USB
mains adapter (not part
of
the
scope
of
delivery).
16
The
battery
is
being charged.
The
charging indicator lights red. After the completed
charging process, the charging indicator goes out.
Notes:
• Charge
the battery
if
the power-on indicator
light
becomes very weak.
• The battery should be
fully
charged
if
the transmitter
is
not
used for
an
extended
period
of
time.