Blaupunkt Comfort 112 Wireless - Connecting the Transmitter to an Audio Device; Putting on the Headphones; Connection to Audio Devices with Jack Socket; Connection to Audio Devices with USB Port

Connecting
the
transmitter
to
an audio device
The transmitter can be connected
to
different audio devices, such
as
portable players,
TV
sets,
stereo systems or computers .
..-
Switch
off
the
audio device before connecting
the
transmitter.
Connection
to
audio devices with jack socket
..-
Connect
the
audio
cable
with
the
jack socket
of
the
transmitter .
..-
Connect
the
audio
cable
with
the
headphone jack
of
the
audio device.
If
the
audio
device
has
a 6.3-mm headphone jack,
use
the
supplied 3.5/6.3-mm audio adapter.
Connection
to
audio devices with cinch sockets
..-
Connect
the
audio
cable
with
the
jack socket
of
the
transmitter .
..-
Plug
the
supplied
cinch adapter
onto
the audio
cable
and connect the red cinch
plug
to
the
right
channel (red) and the
white
cinch
plug
to
the
left channel
(white)
of
the
audio device.
Connection
to
audio devices with
USB
port
..-
Connect
the
USB
cable
with
the
USB
port
of
the
transmitter .
..-
Connect
the
USB
cable
with
the
USB
port
of
the
audio device.
Note:
If
the
transmitter
is
connected
with
a headphone jack and a
USB
port
at
the
same
time,
the
sound
signal
is
transmitted via the headphone jack.
In
this
case,
the
USB
port
is
used
to
charge
the
battery in the transmitter.
Putting on the headphones
For a
good
sound
quality
and a convenient fit,
the
headphones must be positioned per-
fectly
.
..-
Put on
the
headphones. When
putting
on
the
headphones, observe the markings
Land
R
to
identify
the
left
and
right
earpiece .
..-
Adjust
the
headphone band
so
that
the ear cushions completely enclose
the ear and
the
headphones rests comfortably on the head.
18