Need help?Do you have a question about the Blaupunkt GTA 470 DSP and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Amplifier Class | D |
| Max. Power | 1000 W |
| Signal-to-noise ratio | > 90 dB |
| Lowpass Filter | 50 Hz - 250 Hz |
| Crossover | Variable |
| Weight | 2.5 kg |
| RMS Power | 4 x 70W @ 4Ω |
| Power Output | 70 W x 4 |
| Frequency Response | 20Hz - 20kHz |
| Input sensitivity | 0.2V - 6V |
| Impedance | 4 Ω |
| Highpass Filter | 50Hz - 250Hz |
| Bass Boost | 0 - 12 dB |
Manufacturer's warranty terms for products bought within the EU.
Advice on professional installation and self-installation for optimal performance.
Important safety precautions during installation and connection.
Details on connecting audio sources via RCA and the power supply.
Instructions for connecting front and rear loudspeakers with correct polarity.
Configuration for mono output using bridged channels for subwoofers.
Methods for connecting active or passive subwoofers.
Visual guides for various amplifier connection configurations.
Adjusting GAIN, frequency crossover (Low-Pass/High-Pass) for speakers.
Controls for subwoofer crossover, subsonic filter, and phase adjustment.
Using compressor switches and dB/Oct filter slope settings.
Adjusting output level and bass enhancement (BB/SHS).
Settings adjustable via the optional remote control unit.
Detailed specifications including power, frequency response, and dimensions.
Explanation of the LED indicators for power and status.
Guidance on proper product disposal and collection systems.
To Next Page
