GTb 200 A
27
Increase the volume of your stereo system to the desired
volume level. Now slowly increase the gain control 1 until
you can hear a clear ampli cation of the bass level. Next, use
the crossover control 3 to select a lter setting that provides
a well-contoured bass. You may have to alternately optimise
the gain control setting
1 and the lter setting 3.
A droning bass with excessive volume requires a lter setting
with a low frequency.
The phase switch must be set so that the bass is integrated
into the acoustic pattern as best as possible and not recog-
nisable as an individual source.
Also check your settings of the GTb 200 A with the bass con-
trol fully open and, if necessary, with activated loudness. An
overloading of the subwoofer box by selecting an excessive
ampli cation (pos.
1) results in a distorted playback and can
damage the loudspeaker.
Recycling and disposal
Please use the return and collection systems avail-
able to dispose of the product.
Subject to changes!
GTb_200_A_22LG.indd 27GTb_200_A_22LG.indd 27 21.10.2010 14:16:31 Uhr21.10.2010 14:16:31 Uhr
To Next Page
Loading...
Need help?
General