EasyManua.ls Logo

Blaupunkt LS 215e - Optical and Stereo Input Operation; Digital Input and PCM Sound Effect

Blaupunkt LS 215e
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LS 215e
5. OPTICAL operation.
Using an optical cable connect the optical input jack on the rear panel of subwoofer to the
optical output jack of your other audio device. Press the Opt key on the remote controller
enter to the optical play mode, and then you can enjoy the music entertainment.
6. Stereo input operation.
Using a stereo audio cable connects the left and right channel input jack on the rear panel
of subwoofer to the stereo output jack of your other audio device. Press the AUX key on
the remote controller enter to the AUX play mode.
Digital Input And PCM Sound Effect
The Soundbar has built-in PCM decoder. But that is for digital audio input only which
include coaxial 1 & 2, optical and HDMI 1 & 2 input. The PCM decoder of Soundbar can
work automatically.
Note: If you could not listen the sound and enjoy PCM sound effect from Soundbar via
digital input, Please check whether the PCM mode has been selected on the digital audio
output menu of your TV or DVD device. Please kindly note the Soundbar cannot support
DTS format signal if the RAW mode had been selected on your DVD and TV.
55

Related product manuals